Browse all practice questions for the Oklahoma Roofing Endorsement Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Oklahoma Roofing Endorsement Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Polyvinyl Chloride (PVC) roofing is also known as what?
  • Which roofing material is composed of asphalt and fiberglass?
  • What is a characteristic of roof trusses in construction?
  • What is defined as the distance across the roof measured to the edges of the wall plates?
  • According to roofing codes, what is a must-have deck in areas with seismic activity, hurricanes, and tornadoes?
  • What does NRCA recommend for buildings with multiple layers of roof systems?
  • According to NRCA recommendations, which material is suggested for roof sheathing?
  • Which building code requirement is usually associated with soldered one-piece step flashing?
  • What is typically required to prepare factory-formed truss roofs?
  • What is required to support rafters of a double-pitched roof?
  • In roofing terminology, what does an "open valley" mean?
  • Which two materials are noted to be incompatible in roofing applications?
  • Which chapter contains the majority of IBC's 2015 roofing-related requirements?
  • What is the main purpose of a cricket or saddle in roofing?
  • What is the minimum dimension for scupper openings used for emergency overflow roof drainage?
  • In roofing, which type of valley lining exposes the valley linings?
  • What is the primary purpose of a safety belt lanyard in roofing?
  • What is the minimum thickness required for underlayment used in clay tile roofing?
  • What is a common potential issue with roofs having valleys?
  • What type of roof covering includes slate and clay?
  • What is the minimal allowable size of slope for perfect drainage at the roof?
  • Which of the following is a requirement for the use of FM 4474 in roofing?
  • Under what circumstances may the roof not be recommended as a location for HVAC equipment?
  • When installing a single layer of underlayment, what is the minimum required lap for sheet installation?
  • What is a key responsibility of a roofing contractor regarding re-cover systems?
  • What is true about asphalt shingles on low-slope or flat roofs?
  • Which roofing material is considered Class A without testing according to IBC?
  • Which type of roof covering is NOT classified as Class A according to IBC 2015?
  • In roofing, what does "heavy traffic on the roof" refer to?
  • What type of roofing material is not compatible with asphalt products?
  • How wide are starter row shingles compared to full shingles?
  • OSHA requires that the deceleration distance of a PFAS be no more than what distance?
  • What is installed at the end of each shingle course to ensure proper water diversion on a steep-slope asphalt shingle roof?
  • When the roof sheathing is less than what thickness, nails must penetrate through the sheathing?
  • Is it true that NRCA recommends applying underlays on all shingle roof systems without exceptions?
  • In Oklahoma, what slope must a roof have to require a catch platform when working more than 16 feet from the ground?
  • An employer must provide fall protection when workers are exposed to a fall of ________ ft. or above to a lower level.
  • What should typically be installed on the ridge side of a chimney?
  • Which of the following elements makes a hip roof generally more stable than a gable roof?
  • What is a disadvantage of perlite and wood fiber?
  • What is the maximum free fall distance allowed for a PFAS according to OSHA?
  • What is the primary material in composite shingles?
  • What must be ensured when installing roofing materials over nailable decks?
  • Which type of roof membrane is considered a common category of thermoset roofing?
  • A 3/12 roof slope indicates what measurement?
  • Which method is NOT used in the installation of modified bitumen roofing?
  • Which material is not approved by any manufacturer for deck waterproofing purposes?
  • How many nails should be used per 36 to 40 inch shingle if the roof sheathing is less than 3/4 inch?
  • What minimum weight must the anchorage for a fall arrest system support?
  • An extensive evaluation of a roof assembly considers which of the following?
  • Tile roof systems should be applied over what material?
  • What is the minimum requirement for support from a fall restraint system according to OSHA?
  • What must be ensured for proper water diversion on roof systems?
  • What slope per foot is commonly prescribed for new construction on flat roofs?
  • What characteristics define architectural shingles?
  • What is the minimum height at which a substantial catch platform should be provided under working areas of roofs in Oklahoma?
  • What type of underlayment should be used when roof coverings have shorter life spans?
  • What material is effective in shedding water that gets under the shingles?
  • Which of the following roofing systems is suitable for re-covering existing roofs?
  • Asphalt shingles not included in ASTM D7158 must be tested to indicate compliance with which standard?
  • What are three common methods for installing re-cover roof systems?
  • How many layers of No.15 Asphalt-saturated underlayment should be used for roofs with slopes of 18 degrees or more?
  • When are less durable underlayments typically accepted in roofing?
  • Which roofing materials work well for steep roofs?
  • What factors are known as replacement triggers for roof systems?
  • A roof slope below which measurement may likely allow ice to back up under the shingles?
  • Which standard addresses the requirements for fiberglass- or fiberglass-composite-reinforced underlayment products?
  • What additional layer is typically used for mechanically fastening perlite on wood decks?
  • What is the minimum weight of lead flashing required for roof drains according to NRCA?
  • What material may roofing felts be made from?
  • What temperature concern is associated with hot asphalt in roofing systems?
  • Which roofing type is recommended for areas with hail exposure according to building codes?
  • What gauge of galvanized steel is generally recommended for roofing nails?
  • What is the main purpose of low-slope roof insulation?
  • How much gap can exist between butted insulation boards?
  • How are laminate shingles classified compared to standard shingles?
  • Which of the following is NOT a benefit of using asphalt shingles?
  • Which roofing type is not recommended for slopes below 8.5 degrees?
  • What factors should be considered during an extensive roof assembly evaluation?
  • What is the minimum recommended thickness for self-adhering polymer-modified bitumen membrane sheets as underlayment?
  • What characteristic does Spray Polyurethane Foam (SPF) provide as a roofing material?
  • Gravel surfacing on roofs is typically set in what material?
  • What type of insulation is recommended for steel decks?
  • In the context of roofing, what does "Class A" refer to?
  • What is a common method for installing roofs that use membranes?
  • What is important when using aluminum fasteners with treated wood?
  • What is the primary benefit of using a ballasted roofing system?
  • What is the purpose of using trusses in a double-pitched roof?
  • What is the primary benefit of using liquid applied roofing systems?
  • If catch platforms are not in place, what is the minimum required diameter for the safety belt lanyard used by roofers in Oklahoma?
  • How far should an ice-dam protection membrane extend from the inside to the exterior wall on slopes less than 18 degrees?
  • What type of roofing is built-up roofing (BUR)?
  • What key property makes rubber roofing primarily used for roofing applications?
  • Generally, what is the minimum size for spaced sheathing?
  • A guardrail system must be capable of supporting a _____ pound force in any outward or downward direction within ___ inches from the top edge.
  • What type of roof has slopes that run from the peak down to the eaves on all sides?
  • According to IBC, slate roof systems installed over ASTM D226 require what kind of underlayment?
  • Is a self-adhering polymer-modified bitumen sheet membrane suitable for ice-dam protection?
  • What must be removed before conducting a thorough evaluation of a roof assembly?
  • NRCA recommends that roofing nails should be which gauge?
  • What is essential for wind-uplift resistance in mechanically fastened roofing systems?
  • Which roofing material is prone to sensitivity towards hydrocarbons?
  • Which of the following are classifications of steep slope roof coverings?
  • Which type of construction requirements must APA-rated plywood meet?
  • An employer must have fire extinguishers within ___ feet of wherever over 5 gallons of flammable liquids are used on a job site.
  • What is a characteristic feature of laminate shingles?
  • What roofing system is known for using interlocking panels?
  • How should shingles be applied in roofs with valleys?
  • Under the Roofing Contractor Registration Act, who is exempt from the licensing requirements in Oklahoma?
  • What are the primary components of a typical Personal Fall Arrest System (PFAS)?
  • What is the recommended minimum clearance between pipes and curbs or walls?
  • What type of roofing is commonly referred to as "tar and gravel" roofing?
  • What is the minimum slope required for roof assemblies according to NFPA 5000?
  • What is a key requirement for the installation of built-up roofs?
  • True or False: Plywood for solid sheet sheathing has been tested for reasonable compatibility with shakes and shingles.
  • Which method can be used to install a modified bitumen roof?
  • Which types of flashing may be used when a roof system abuts a vertical surface?
  • What material is most commonly used for sheathing roofs?
  • Which type of nails are typically used for securing clay roofing?
  • What term describes the spacing between butt joints of adjacent shingles?
  • Which type of roofing is NOT typically considered steep slope?
  • On roofs which is ____ feet or less in width, the use of a safety monitoring system alone is allowed.
  • What impact does proper underlayment have on roofing systems?
  • According to relevant regulations, what must fall protection training include?
  • What types of roofs typically require different fastening techniques based on their slope?
  • What is a key characteristic of slate roof systems?
  • What is the recommended application surface for asphalt shingles?
  • What does IBC state about the liability of architects in relation to building code conformance?
  • An effective ventilation system in a roof can help prevent which of the following issues?
  • Body belts are acceptable in a Personal Fall Arrest System (PFAS). True or False?
  • Which of the following is a common insulation used on steel decks?
  • Which type of roof is described as being appropriate for upper story enlargement without increasing total height?
  • What describes the method of torch-application for modified bitumen membrane sheets?
  • Which roofing material may be laminated with an additional layer for enhanced properties?
  • For roofing felt, what type of material can be considered?
  • When using a safety monitoring system, the system can only be utilized on roofs that are how wide maximum?
  • What materials SHOULD NOT be installed in direct contact with treated wood?
  • How are truss roofs primarily constructed?
  • The top rails of a guardrail system must be how many inches above the walking surface?
  • Which roofing system is specifically designed for steep slopes?
  • What is the pitch range for medium pitched roofs?
  • What can act as a baffle to prevent wind-driven snow or foreign material from entering the attic cavity?
  • What is the primary cause for selecting a specific roofing application?
  • How does proper ventilation impact roof service life?
  • Which materials can be part of the components for nailable decks?
  • Which of the following can contribute to increasing a roof's water tightness?
  • Which type of roofing material should NOT be used due to concerns of water infiltration?
  • Which roofing material is identified as not ideal for steep roofs?
  • What minimum amount of business general liability insurance must an Active Roofing Contractor performing only residential work provide in Oklahoma?
  • What additional classifications must asphalt shingles meet when labeled for compliance?
  • According to IBC 2015, which type of covering is included in Class A roof assemblies?
  • What is the primary purpose of a guardrail system?
  • Which standard specification is applicable for EPDM used in single-ply roof membranes?
  • What should be done to prevent water from entering roofs with intersecting surfaces?
  • What type of roof has slopes on all four sides with equal lengths?
  • Which of the following criteria is important for maximizing roof service life?
  • What roofing type is characterized by high solar reflectivity and comes in white?
  • Underlayment's should be used with which type of covering?
  • Which roofing system relies heavily on existing system adhesion for wind-uplift resistance?
  • Which material may be applied directly over low slope metal roofs?
  • When using structural standing-seam metal panel systems, which testing standard is primarily acceptable?
  • According to OSHA regulations, what defines a low slope roof?
  • What must rafters be covered with before applying finishing roof material?
  • When using plywood as a roof deck material, what nominal thickness is recommended for 24-inch rafter spacing?
  • According to OSHA, a fall restraint system must have the capacity to support how many pounds or how many times the max expected force needed to restrain a worker?
  • Which roofing material is recommended for use on a wood deck?
  • What is the purpose of ice-dam protection membranes?
  • Where can OSHA's Fall Protection standards be found?
  • According to NRCA, what defines low-slope roof systems?
  • An employer must protect roofers from asbestos exposure according to the protection requirements set forth in what standard?
  • What characteristic does PVC roofing have compared to EPDM?
  • Which material can be used to increase a roof's insulation value?
  • Steep slope structural roofs are primarily designed to be installed over which type of decking?
  • The anchorage for a fall arrest system needs to be able to support how many pounds per worker attached?
  • What is a key feature of thermoset roof membranes?
  • Which roofing material is known for being virtually leak-proof?
  • What characteristic must roof assemblies have in hail-prone regions according to NFPA 5000?
  • The UL tests under which code evaluate a roof covering's behavior against intermittent flame exposure?
  • What is the compatibility of plywood for solid sheet sheathing with roofing materials?
  • Which of the following standards applies to asphalt saturated felt underlayment?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy